Signal adapter for Triumph Mo.Tri V.2 | Motogadget

Exclusively available from Motogadget is the signal adapter for Triumph Twin and Triple models with CAN bus technology!

Before the arrival of the Mo.Tri, it was not possible to remove the original instruments on Triumph 2-cylinder (2011-...) and 3-cylinder (2006-...) models. With the exception of the Triumph Breakout Box, exclusively designed for the Motoscope Pro, a Motogadget gauge could not be mounted on a Triumph.

Indeed, once the original instrument is disconnected, the integrated CAN bus of these models ceases to be operational. No modification is possible!

To solve this problem, Motogadget engineers designed the Mo.Tri, an exclusive from the German manufacturer for Twin models.

The Mo.Tri transmits engine speed, vehicle speed, signals for indicator lights (turn signals), low fuel level indicator, error memory, high beam, neutral, high water temperature, oil pressure. (Some of the warning lights on 4 or 5 LED instruments are multifunctional.)

Its installation is particularly simple, almost Plug'n'Ride.

The original connector is used, and the instrument and indicator wires are connected to the Mo.Tri terminals using color codes:

• no soldering or wire detection needed;
• no modification of the wiring harness;
• no cancellation of the vehicle warranty.

Please select your Triumph model and its year of manufacture.

Please note: the model year is not necessarily the same as the year of manufacture. Position "11" (from the left) in the motorcycle's identification number identifies the model year.

Examples:

• "8" = 2008;
• "A" = 2010;
• "B" = 2011;
• "C" = 2012;
• etc.

Dimensions of the Triumph Mo.Tri Signal Adapter

• length: 42 mm;
• width: 42 mm;
• height: 27 mm.

Scope of Delivery

• Mo.Tri adapter;
• connector (corresponding to the selected model);
• end caps;
• 2 M3 screws;
• cable holder;
• cable ties.